| Customization: | Available |
|---|---|
| Task: | Controller |
| Signal: | Continuous |
|
Still deciding? Get samples of US$ 35/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Item | Driver |
| Insulation Resistance | 100Mohms or more when 500VDC is applied between the windings and the frame |
| Dielectric Strength | Sufficient to withstand 0.5KVAC at 50Hz applied between the PG and power supply input terminal for 1 minute. |
| Operating Ambient Temperature | 0~ +50 deg. C, nonfreezing |
| Environment humidity | 85% maximum, non-condensing |
| Conditions Atmosphere | No corrosive gases or dust |
| Degree of Protection | - |
| SRM-24 | SRM-36 | SRM-48 | |||||||
| 05 | 10 | 15 | 05 | 10 | 15 | 05 | 10 | 15 | |
| Power supply | 24VDC±10% | 36VDC±10% | 48VDC±10% | ||||||
| Rated current(A) | 3 | 5 | 8 | 2.5 | 5 | 8 | 2.5 | 5 | 8 |
| Max. current (A) | 5 | 10 | 15 | 5 | 10 | 15 | 5 | 10 | 15 |
| Continuous power(W) | 72 | 120 | 180 | 90 | 180 | 270 | 120 | 240 | 360 |
| Peak output power (W) | 120 | 240 | 360 | 180 | 360 | 540 | 240 | 480 | 720 |
| Speed control method | One of the following(optional): Built-in potentiometer 2.External Potentiometer 3. DC Voltage (0~5VDC) |
||||||||
| Input signal | CMOS logic: H(ON): 4~5V L(OFF): 0~0.5V Start/Stop input H: start L: Stop Brake input H: instant stop L: RUN Direct of rotation H: CCW L: CW |
||||||||
| Output signal | Open collector output,, External use condition 5VDC,100mA Max. Speed signal output(PG output)24P/R, Alarm signal output(ALM) |
||||||||
| Protective Functions | When the following are activated, the alarm signal well be output and the motor will come to a stop: Overload protection: This will be activated when the motor load exceeds Max. current for at least 6 seconds; Over-voltage protection: This will be activated when the voltage applied to the driver exceeds power supply by at least 15%; Under-voltage protection: This will be activated when the voltage applied to the driver falls at least 25% below power supply; Out-of-phase protection: This will activated when motor signals are abnormal, due to disconnection of cable, etc. |
||||||||
| Rating | continuous | ||||||||
| Note | If use the brake function, the speed must be 500rpm or lower. | ||||||||
){kind=link}